Home/Systems/Small Form Factor (SFF) Systems/SFF-FPC3130

Low profile Intel Atom D2550 fanless embedded system with automotive ignition power On/Off control

  • Wide Operating Temperature (-20 ~ 70˚C)
  • Rugged Design for Shock/Vibration Protection
  • On-board Intel Atom Dual Core D2550 processor (1M Cache, 1.86 GHz)
  • 1x DDR3 SO-DIMM sockets up to 4GB
  • 6x USB 2.0 and 2x Gigabit Ethernet ports
  • 2x RS-232 and 2x RS-232/422/485 via 1x DB-44 connector
  • 1x 2.5" drive bay and 1x externally accessible CFast Socket
  • One Mini PCI Express slot
  • 9 - 32VDC input, smart ignition power on/off, delay-time, and battery low voltage protection for automotive installations

Contact Sales


Processor & Chipset
CPU Socket Onboard
System Bus DMI
Processor Atom D2550
Number of processors (std/max) 1/1
Processor Cooling Passive Heatsink
Chipset Intel NM10
Memory Capacity Up to 4GB of DDR3 800/1066MHz memory
Memory Sockets 1x 204-Pin SO-DIMM DDR3 socket
DIMM Sizes 512MB, 1GB, 2GB, 4GB
Standard / Integrated Devices
Network Controllers
  • 2x Realtek 8111 Gigabit Ethernet Controller
  • Supports 10BASE-T, 100BASE-TX, and 1000BASE-T
Display Controller Integrated Intel GMA 3650
Watchdog Timer 1~255 levels reset
Audio Mic-in/Line-out/Line-out
I/O Ports
Front Panel I/O Ports

4x USB 2.0 Ports

Rear Panel I/O Ports

2x RS-232 ports / 2x RS-232/422/485 selectable ports with DB-44 pin connector
4x USB 2.0
2x RJ-45 ports for Gigabit Ethernet
1x DVI-I
1x DVI-D

Expansion Slots
Supported Bus Interfaces
Expansion Slots 1x Mini-card slot interconnected with SIM card socket for optional WiFi or HSUPA module
1x SIM Card Socket
Storage and Media
Number of hard drives supported 1x 2.5" fixed SATA II hard drive, 1x CFast
Interface type supported SATA 3 Gb/s
Solid State Storage Solid State Drives Available
Storage Controllers Intel NM10
Chassis and Power Supply
Form Factor Small Form Factor (SFF)
Construction Aluminum chassis with fanless design
System Cooling Fanless
Chassis Dimensions
(W x D x H)
252 x 199 x 33 mm
9.92" x 7.83" x 1.3"
Power Supply
  • Onboard DC to DC power convertor supports 10 to 28 VDC input, ATX function
  • 1x Optional external 65W AC adapter with screw locking power jack. 19 VDC Output
Operating temperature -20 ~ 70C (-4 ~ 158F)
Non operating temperature -40 ~85 C (-40 ~ 185F)
Humidity (operating) 10 - 95% non-condensing
Humidity (non operating) 5 - 95% non-condensing
Certification CE, FCC Class B